|
|
|
|
HOME |
|
|
|
|
|
PRODUCTS |
|
|
|
|
|
SERVICES |
|
|
|
|
|
COMPANY |
|
|
|
|
|
FEEDBACK |
|
|
|
|
|
| ANNOUNCEMENTS |
|
Friday 06/30/06
|
|
| - |
The new Web design has been completed.
|
|
|
Friday 06/30/06
|
|
| - |
A revised RFQ submission form has been added to the Web site.
|
|
|
|
|
|
|
|
|
|
|
|
ACCURLOY |
|
|
 |
Clean,
fine-grain, alloy steel shafting produced by the electric furnace process
and furnished TG & P for applications requiring high
tensile strength and resistance to wear, shock and fatigue.Can replace: heat-treated 4340, 4140, 4150
and 6150
Sizes: Accurloy – ¼ to 9” diameter, 3 to 100 mm diameter, up to 27’
long
|
|
NICHROLOY |
|
|
 |
Clean,
fine-grain, alloy steel shafting produced by the electric furnace process
and furnished hot-rolled for applications requiring high
tensile strength and resistance to wear, shock and fatigue.Can replace: heat-treated 4340, 4140, 4150
and 6150
Nichroloy – ½ to 16” diameter, up to 27’ long
|
|
V-MAX |
| |
 |
An economical, universal bar
stock designed for strength as well as easy machining.
- Can replace: 4140 ANN (CF or polished), 1144, 1141, 1045, 1020 and
1018
- Sizes: ¼ to 8” diameter, up to 24’ in length
|
|
MAR-10 |
| |
 |
A vacuum-remelt grade of
martensitic age-hardenable stainless steel, custom-designed for
pump-shaft type applications which require higher strengths than 304 or
316/317, and greater corrosion resistance than 410/416 or 17-4PH. Mar-10
is aircraft quality, specially ground and polished, and straightened to
pump shaft requirements.
- Can replace: aircraft quality alloy and stainless, 450, 440, 416,
410, 17-4, 317, 316 and 304
- Sizes: 5/8 to 7” diameter, up to 24’ in length
|
|
MANGABRAZE |
| |
 |
An abrasion-resistant,
work-hardening, proprietary chemistry alloy plate intended for use where
both high hardness and toughness are desired. Field tested under the most
severe conditions, Mangabraze is a proven leader in resistance to wear
failure due to its rich Nickel/Manganese chemistry. Significantly reduces
costs by providing an extended service life. 360-425 BHN
- Can replace: alloy tool steel grades 4140, 4340, 0-1, D-2; alloy
wear plates
- Sizes: 3/16 to 4” thick, up to 8 x 24’
|
|
E-Z BRAZE |
| |
 |
A 280-340 BHN version of
Mangabraze, E-Z Braze is easy to weld and easy to form. Designed for
applications where ease of fabrication and resistance to shock are
required.
- Can replace: alloy tool steel grades 4140, 4340, 0-1, D-2; alloy
wear plates
- Sizes: 3/16 to 6” thick, up to 8 x 24’
|
|
TUFFBRAZE |
| |
 |
A high quality
abrasion-resistant liner plate engineered to provide excellent resistance
to a variety of severe service abrasive applications where ductility and
fabrication may be required. 400-444 BHN
- Can replace: abrasion-resistant wear plate, castings
- Sizes: ¼ to 2” thick, up to 8 x 24’
|
|
TUFFBRAZE 500 |
| |
 |
A high hardness alloy AR
plate, engineered for cut and weld applications where severe low stress
(smaller particle) abrasion is the main cause of failure. 500-515 BHN
- Can replace: AR plate, Cr-Fe carburizing or nitriding steels,
carbide overlay
- Sizes: ¼ to 2” thick, up to 8 x 24’
|
|
TUFFBRAZE 600 |
| |
|
600 BHN surface on 515 BHN
base alloy AR plate.
- Can replace: AR plate, Cr/W carbide overlay, thermal spray coated
steels
- Sizes: ¼ to 2” thick, up to 8 x 24’
|
|
TUFFCORE |
| |
 |
600 BHN ID hardness
abrasion-resistant wear pipe, ideal for applications where heat and heavy
abrasion penetrate and erode the average pipe (e.g. ash slurry lines,
coal, gravel and other abrasive product conveyance systems).
- Sizes: 2.5 to 24” OD, STD or EH, up to 20’ in length
|
|
NICHROLOY L |
| |
|
A low carbon version of the
Nichroloy product line, ideal for tubing applications where welding is
required.
- Sizes: 1 to 18” OD, STD or EH
|
|
OH HOLLOW BAR |
| |
|
An oil-hardened tool steel
tubing designed to reduce time and costs in hollow bar applications.
|
|
HI-MANG |
| |
|
An 11-14% manganese steel,
available in plate, rounds and flat and fabrications for shot blast
parts, chain guides, Pangborn liners, Bradford breaker plates and other
work-hardening steel applications.
|
|
TRED
PLATE |
| |
|
A 400 BHN lug plate for
improved wear-resistance in chutes, fan blades, loading docks, and
deflection plates.
|
|
WEAR
SCREENS |
| |
|
Heat-treated plates,
perforated per your specifications for shake-outs, grating or conveyor
screens.
|
|
WEAR
BARS |
| |
|
Heat-treated flat bar;
flame-cut, saw-cut or rolled for guide rails, assembly-line tracks, brake
dies, blades or various wear edges.
|
|
STUD
STOCK |
| |
|
Fully threaded bar for
high-strength bolts in all grades of alloy and stainless steels.
|
|
TUFFKEY |
| |
|
Precision square keystock in
12’ lengths.
|
|
HI-CASE |
| |
|
60 Rockwell case-hardened
bearing shaft stock.
|
|
STAINLESS |
| |
|
Custom stainless steel to
your specifications, including hollow bar, high-nickel grades and custom
machining services.
|
|
NICHROLOY
CD |
| |
|
Flats, squares, hexagons and
octagon for rails and tool room.
|
|
TOOL
STEEL |
| |
|
O1, D2, H-13, A-2, S-7,
etc... the right tool-steel to fit the need.
|
|
PLASTIC |
| |
|
Various grades and sizes of
non-steel wear materials, e.g., UHMW and urethane liner plates. |
|
|
|
|
